The 6 DIODE features long-life LEDs that provide full light output, while its low amperage design draws less current than conventional lights, resulting in a reduced load on vehicle electronics.

Advanced and cost effective LED Clearance/Marker lamps with multiple LEDs for outstanding brightness. All-weather molded polycarbonate lens and housing resist breakage, completely sealed to resist corrosion and moisture. Uses standard mounting holes and accessories, less susceptible to shock and vibration, and draws less current than conventional lights. For 12V system use only.

Advanced and cost effective LED Clearance/Marker lamps with multiple LEDs for outstanding brightness. All-weather molded polycarbonate lens and housing resist breakage, completely sealed to resist corrosion and moisture. Uses standard mounting holes and accessories, less susceptible to shock and vibration, and draws less current than conventional lights for 12V system use only.

Advanced and cost effective LED Clearance/Marker lamps with multiple LEDs for outstanding brightness. All-weather molded polycarbonate lens and housing resist breakage, completely sealed to resist corrosion and moisture. Uses standard mounting holes and accessories, less susceptible to shock and vibration, and draws less current than conventional lights for 12V system use only.

The combination clearance and marker light is FMVSS PC rated for use when properly installed, featuring 8 long-life diodes that provide full light output. It draws less current than conventional lights, resulting in a lower load on vehicle electronics.

The 2-1/2" sealed marker lamp unit features a polycarbonate (Lexan) lens and housing and is available in red. It also serves as a replacement lamp unit for 67-805. Please note that this item is the lamp unit only; for a complete assembly, check out 67-805.

The product features a 2-1/2" sealed lamp unit with a reflector lens and a 15,000-hour bulb.

2" sealed marker lamp unit with POLYCARBONATE (LEXAN) lens and housing. Designed for narrow rails and tight installations. Features a 15,000 hour bulb. Available in bulk package quantities for easy ordering. Check out 67-815 for a complete assembly.

Rectangular 1-bulb sealed lamp assembly with branch deflector mount kits. Lamp unit snap-locks into mount. Lexan lens. Only 1-15/16x4-1/2". 15,000 hr. bulb. Compatible with various mounting kits and complete assemblies.

The product features a rectangular 1-bulb sealed lamp assembly with branch deflector mount kits, where the lamp unit snap-locks into the mount and is equipped with a Lexan lens. It measures only 1-15/16 x 4-1/2 inches and has a bulb life of 15,000 hours.

Amber and red rectangular 1-bulb sealed lamp assemblies come with a rail and header mount kit, featuring a branch deflector. The Lexan lamp snap-locks into the mount and measures only 1-7/16"x4-3/8".

Rectangular 1-bulb sealed lamp assembly with branch deflector mount kits. Lamp unit snap-locks into mount. Lexan lens. Only 1-15/16x4-1/2". 15,000 hr. bulb. This is the lamp unit only; check out 67-561 for a complete assembly and 67-569 for a mounting kit.

The rectangular 2-bulb sealed lamp assembly comes with a base and wire, and the Lexan lamp snap-locks into the mount. It features a unique plugin base and measures only 1-1/4"x4-1/8". The bulb has a lifespan of 15,000 hours.

This item is the lamp unit only; check out 67-661 for a complete assembly. This item is the lamp unit only; check out 67-665 for a complete assembly.

The slim design, with a width of 3/4”, is ideal for narrow rail designs and must be mounted horizontally. Additionally, it features 2 long-life LED diodes that reduce servicing requirements.

Amber Lamp Unit for 67-721 and Red Lamp Unit for 67-725.

The Super 21 marker or clearance lamp features a standard lens that serves as a combination clearance/marker when mounted at a 45° angle. It has a length of 6 inches and a width of 2 inches, and is equipped with a 15,000-hour bulb. Additionally, it includes 2 CP.

The triple identification bar light features a black enamel metal bar with three sealed lamps positioned on 6-inch centers, and an overall length of 16 inches.

The product features a high impact white plastic base with a snap-on lens, measuring 4"x2"x1". It is equipped with two wedge-base fleet duty 2 CP bulbs and has two holes on 3" centers for easy installation.

The SEALED LED features epoxy-encapsulated electronics that help prevent damage from moisture and corrosion, while its hardwired design eliminates pin corrosion. Additionally, it boasts a 16 DIODE double bullseye LED pattern.

The product features a high impact white plastic base with a snap-on lens, measuring 4"x2"x1". It is equipped with two wedge-base fleet duty 2 CP bulbs and has two holes on 3" centers for easy installation.

The product features a zinc die-cast base with a shock mount and a snap-on lens that includes an o-ring. Its dimensions are 4"x2"x1", and it is equipped with two wedge base fleet duty 2 CP bulbs. Additionally, there are two holes on 3" centers for mounting.

The product features a chrome-plated high impact plastic housing, a Vibar shock mounted socket in flat black, and dimensions of 4-7/8"x2-1/4"x1-3/8". It is designed to accommodate a wedge base fleet duty 2 CP bulb.

The slim design, with a width of 3/4”, is ideal for narrow rail designs and must be mounted horizontally. Additionally, it features 2 long-life LED diodes that reduce servicing requirements.

The product features an aluminum die-cast flat back with a mounting pad furnished, measuring 5-1/4"x2-1/8"x1-3/8". It is designed for a wedge base fleet duty 2 CP bulb and includes 4 holes on 3-7/8" centers, spaced 13/16" apart.

The integral flange mount features a molded-in flange with mounting holes 7.24” on center, and its mid-point design is commonly mounted at the mid-point on trailers or in “no zone” areas on tractors, complying with SAE J2039 standards. Additionally, it includes 6 long-life LED diodes that reduce servicing requirements.

LED MARKER LIGHT functions as a clearance and side marker light when properly mounted. Electronics are sonically sealed in epoxy to prevent failure from corrosion, moisture, or vibration. Draws only .05 Amps for less load on vehicle electronics. Long-life LED provides longer life than incandescent lights. Voltage: 12 VDC, Weight: .02 Lbs., Dimensions: .730 W X .730 H X .938 D.

The unit is a hermetically sealed throw-away type, measuring 4-1/2"x11/16"x1-1/8". It features a shock-protected 2 CP bulb with "PC" usage approval and includes a QD terminal assembly that is heat-shrink sealed.

The Mack OEM fender marker with ground is designed for fiberglass fenders and features a 3-7/8" diameter. It includes a bayonet base heavy duty 4 CP bulb and is secured with 2 screws on 2-15/16" centers.

The streamline cab marker features a plastic housing designed for flat to slightly curved surfaces, equipped with a bayonet base heavy duty 4 CP bulb. It includes a single screw that retains the lens, which has 2 holes on 3" centers.

Black enamel steel fits a 4-1/2" opening, with 3 screws on a 4-15/16" circle. It features a nylon plug on the pigtail to help resist moisture and uses a standard 4-1/4" lens, which is retained by a steel snap ring.

The product is made of stainless steel and fits a 4-1/2" opening, featuring 3 screws arranged on a 4-15/16" circle. It includes a brass socket, a stainless snap ring, and a nylon plug on the pigtail, all designed with corrosion-resistant features. Additionally, it comes with a standard 4-1/4" lens.

The product features black enamel steel with a 3-3/4" diameter lens, retained with 2 screws. It has a stud mount measuring 2 1/4" on 2" centers and does not include LP. All lamps are designed with dust-tight, water-tight construction, utilizing a 1157 bulb and a nylon plug type pigtail.

The combination light is designed for trailers up to 80" wide and offers up to 7 functions: stop, tail, turn, side marker, rear reflector, side reflector, and LP light. It features a molded plastic housing and is identified as PM 440/440L.

LED MARKER LIGHTS designed for reliable performance with P2 rated lights functioning as marker lights and PC rated lights serving as both clearance and side marker lights. Features sonically sealed electronics for protection against corrosion and moisture. Low amperage draw of .05 Amps minimizes load on vehicle systems. Long-life LED technology ensures reduced maintenance. Specifications include 12 VDC voltage, polycarbonate lens and housing, weight of .02 lbs, grommet mount, and dimensions of .730 W X .730 H X .938 D.

LED MARKER LIGHTS designed for reliable performance with P2 and PC ratings. Features sonically sealed electronics to prevent failure from corrosion, moisture, or vibration. Low amperage draw of .05 Amps minimizes load on vehicle systems. Long-life LED technology ensures reduced maintenance. Specifications include 12 VDC voltage, polycarbonate lens and housing, and dimensions of .730 W X .730 H X .938 D.

The product features a single face made of black enamel steel and utilizes a widely used 3-screw lens design. It has a diameter of 4-1/8 inches and mounts with a 1/2-20x7/8 inch long stud.

The item features a double face design in red and amber, constructed from black enamel steel. It includes a 3-screw lens and has a diameter of 4-1/8 inches, with a mounting stud that is 1/2-20x7/8 inches long.

2 year limited warranty on LED sealed lamps with SureSeal connectors. Sonically sealed polycarbonate lens and housing. Direct pin-to-circuit board solders ensure vibration resistant contacts. Electronics sealed in epoxy resist corrosion and moisture. Standard mounting holes and accessories used. Less current draw than conventional lights.

2 year limited warranty on LED sealed lamps with SureSeal connectors. Sonically sealed polycarbonate lens and housing. Direct pin-to-circuit board solders ensure vibration resistant contacts. Electronics sealed in epoxy resist corrosion and moisture. Standard mounting holes and accessories used. Less current draw than conventional lights.

LED sealed lamps equipped with SureSeal connectors. Sonically sealed polycarbonate lens and housing. Direct pin-to-circuit board solders assure vibration resistant contacts. Electronics sealed in epoxy to resist corrosion and moisture. Uses standard mounting holes and accessories. Less susceptible to shock & vibration. Draws less current than conventional lights. Kit includes lamp, grommet and pigtail. Warranty varies: 2 years or lifetime.

Advanced and cost effective LED lamps with 10 high flux LEDs for outstanding brightness. Polycarbonate lens and housing resist breakage, completely sealed to resist corrosion and moisture. Standard mounting holes and accessories for easy installation. Less susceptible to shock and vibration, drawing less current than conventional lights.

Advanced and cost effective LED lamps with 10 high flux LEDs for outstanding brightness. Polycarbonate lens and housing resist breakage, completely sealed to resist corrosion and moisture. Standard mounting holes and accessories for easy installation. Less susceptible to shock and vibration, drawing less current than conventional lights.

LED Round Lights feature seven-diode technology for reliable, highly visible lighting suitable for trailers, trucks, and equipment. Specifications include a voltage of 12 VDC, PL3 pigtail styles with clear 2 prong and red/amber 3 prong options, a lens diameter of 4", and an overall diameter of 4-1/4". MADE IN THE U.S.A.

LED Marker/Clearance Lights feature three-diode LED technology for reliable visibility on trailers, trucks, and equipment. Operating at 12 VDC with a 12 prong marker pigtail style. MADE IN THE U.S.A. Note: This is the lamp only.

Black Grommet for P2/P3/PC rated Peterson® 3/4" LED marker lights. Larger package sizes provide easy ordering to refill stock or large supply jobs, and these grommets are suitable for use with 2" LED lights as well as 4" LED lights.

LED Oval Lights feature seven-diode technology for reliable, highly visible lighting in trailers, trucks, and equipment. Specifications include 12 VDC voltage, PL3 pigtail style with 2 prong for clear and 3 prong for red/amber, and dimensions of 6-1/2" in length and 2-1/4" in height. MADE IN THE U.S.A.

LED Marker Lights designed for reliable performance. P2 rated for marker use; PC rated for clearance and side marker applications. Features sonically sealed electronics to prevent failure from corrosion, moisture, or vibration. Low amperage draw of .05 Amps minimizes load on vehicle systems. Long-life LED outlasts incandescent options. Specifications include 12 VDC voltage, polycarbonate lens and housing, .02 lbs weight, grommet mount, and dimensions of .730" W x .73" H x .938" D. Kit includes lamp, grommet & pigtail.

LED Oval Lights feature seven-diode technology for reliable, highly visible lighting in trailers, trucks, and equipment. Specifications include 12 VDC voltage, PL3 pigtail style with 2 prong for clear and 3 prong for red/amber, and dimensions of 6-1/2" in length and 2-1/4" in height. MADE IN THE U.S.A.

LED Marker/Clearance Lights feature three-diode LED lights that provide highly visible, reliable lighting for trailers, trucks, and equipment. Specifications include a voltage of 12 VDC and a pigtail style of 12 prong marker. These lights are made in the U.S.A.

Bulk package sizes for easy ordering. Available in Red. Features a 2-1/2" sealed marker lamp unit with a durable Polycarbonate (Lexan) lens and housing. Functions as a Replacement Lamp Unit for 67-805. This is the lamp unit only; refer to 67-805 for a complete assembly.