Rebuild kits for the 2" mini angle grinder.

Typical Application: Air brake hose lines. Inner Tube: Synthetic EPDM. Reinforcement: One Polyester Braid. Cover: Synthetic EPDM. Temperature Range: -40 °F to 212 °F (-40 °C to 100 °C)

Durable metal wire helps prevent hydraulic hose from cuts and abrasion while allowing full flexibility and movement. Hot-dip galvanized steel provides exteneded service life in harsh environments.

Durable Nylon 12 construction with polyester reinforcement (Type B) provides SUPERIOR ABRASION RESISTANCE against gasoline, diesel fuel, and road salts. Available in TYPE A (less than 5/16" OD) and TYPE B (over 5/16" OD) for various applications. Compatible with DOT Push-to-Connect and Compression-Style Fittings. Withstands temperatures from -49° to 221°F. Meets SAE J844 and DOT FMVSS 49 CFR 571.106 standards.

Compact design with powerful performance. High performance motor for fast grinding. Durable aluminum housing ensures ruggedness while remaining lightweight. Ideal for weld preparation, rust removal, and deburring. Includes angle grinder, spanner wrenches, and support handle. Made in the U.S.A. Perfect for tight spaces and all-day use.

These pre-made hydraulic hose assemblies provide a fast way to replace failed hydraulic hoses when crimping equipment isn’t available. Each hose is assembled with the same style and size of fitting on both ends, and is available with male pipe rigid or SAE 37° (JIC) female swivel end connections. Built with 100R16 high-pressure hydraulic hose, they’re ideal for off-the-road construction equipment, farm equipment, and other demanding high-pressure applications. Made in the U.S.A.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I. and a temperature range of -325 °F to 1200 °F.

These pre-made hydraulic hose assemblies provide a fast way to replace failed hydraulic hoses when crimping equipment isn’t available. Each hose is assembled with the same style and size of fitting on both ends, and is available with male pipe rigid or SAE 37° (JIC) female swivel end connections. Built with 100R16 high-pressure hydraulic hose, they’re ideal for off-the-road construction equipment, farm equipment, and other demanding high-pressure applications. Made in the U.S.A.

Dual reel combined extension cord and air hose reel provides a single mounting point for both services. Each reel operates independently for increased usability.

Ideal for connecting air brake tubing at a 45-degree angle in tight spaces. These brass fittings provide a full-flow design for optimal air efficiency and are DOT-approved for safety compliance. Use with Kimposite Air Brake or Synflex® Eclipse tubing. Ensure proper alignment during installation for best performance.

Reinforced, abrasion and weather resistant hose provides durability and flexibility, even in cold temperatures. Crush-resistant brass fittings provide increased durability and corrosion resistance.

K700 K-Series hydraulic crimper with 230V electric pump delivers 260 tons of crimping force for hoses up to 2" (2-wire, 4-spiral, and 6-spiral); front-load design aids insertion and alignment, fully adjustable micrometer supports precise crimps, and quick-change die tool plus built-in front die storage speed setup—foot switch keeps hands free, manual back stop supports repeat crimps, and base mounting holes allow bench mounting; made in the U.S.A.

Diamond hydraulic hose cutting saw blade is designed for quick, clean cuts on heavy 4- and 6-wire hydraulic hose with reduced debris; also cuts spiral, industrial, and metal hose—fits K-Series and many other hose saws including Clean-Cut®, Danfoss Power Solutions, Gates, Goodyear, Imperial Eastman, Parker®, Stratoflex, and Toledo.

General purpose high pressure hydraulics designed for compatibility with hoses K145, DK145, DK245, DK425, K245, KA245, KT245, K280 & K425. Constructed from low carbon steel with trivalent zinc plating. Wide selection of hose and end configurations allows for diverse applications. Pressure determined by maximum working pressure for hose size.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I., temperature range of -325 °F to 1200 °F, and made from 316 Stainless Steel.

This 1" drive compact impact gun delivers exceptional power in an inline, space-saving design for access where larger impact guns won’t fit. It provides 2,000 ft-lbs (±10%) working torque and 2,200 ft-lbs (±10%) maximum torque. Designed for comfort and control, it features a double-handed grip, a wide trigger, and a 45° adjustable air inlet to optimize hose routing and reduce interference during use. At just 15.84 lb, it’s significantly lighter than conventional 1" impacts to help reduce fatigue—especially during extended or overhead work. The trigger offers variable speed control plus three dial-actuated forward and reverse speed settings, and a 6" anvil helps reach hard-to-access areas without a separate extension. Factory rebuild/repair kits are available to help maintain OEM performance over time.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I., temperature range of -325 °F to 1200 °F, and made from 316 Stainless Steel.

General purpose high pressure hydraulics designed for compatibility with hoses K145, DK145, DK245, DK425, K245, KA245, KT245, K280 & K425. Constructed from low carbon steel with trivalent zinc plating. Wide selection of hose and end configurations allows for diverse applications. Pressure determined by maximum working pressure for hose size.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I. and a temperature range of -325 °F to 1200 °F.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I., temperature range of -325 °F to 1200 °F, and made from 316 Stainless Steel.

General purpose high pressure hydraulics designed for compatibility with hoses K145, DK145, DK245, DK425, K245, KA245, KT245, K280 & K425. Constructed from low carbon steel with trivalent zinc plating. Wide selection of hose and end configurations for diverse applications. Pressure determined by maximum working pressure for hose size.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I. and a temperature range of -325 °F to 1200 °F.

General purpose high pressure hydraulics. Compatible with hoses K145, DK145, DK245, DK425, K245, KA245, KT245, K280 & K425. Pressure determined by maximum working pressure for hose size. Made of low carbon steel with trivalent zinc plating. Wide selection of hose and end configurations for diverse applications. Assemble with K100, K300 or K500.

Completely interchangeable with Swagelok® and Parker A-Lok® fittings. Features a double collet swaging system for maximum reliability and leak-free performance. Corrosion resistant due to K-Cor treatment, enhancing surface hardness. Suitable for instrumentation and controls in various industries. Specifications include up to 10,900 P.S.I., temperature range of -325 °F to 1200 °F, and made from 316 Stainless Steel.

<ul><p>Reliable piping connections without soldering or brazing. Suitable for water service, diluted acids, alkali solutions, and oil-free air. For use with ASTM B88, Types K, L, and M soft copper tubing in sizes 1/2" to 1". Body made of silicon bronze ASTM B584 alloy C87600, with EPDM O-Ring. Maximum temperature 250 °F.</p></ul>